Autel G-Box Diagram for Mercedes All Keys Lost (OBD, on bench)

Look here: How to connect Autel G box when you program a new key to Mercedes all keys lost using Autel IM608

Autel G box description:

It’s required when you do all keys lost for Mercedes.

1. Mercedes all keys lost – faster password calculation

-8x times faster password calculation for EIS W172, W204, W207

-4x times faster password calculation for EIS W209, W211, etc.

2. Mercedes all keys lost – no more repeated insertions and removables of ir simulator

W164/-208, W251/-2008, W164/2009-, W169, W251/2009, W216, W221 (partial), W202 (K)/ W208 (K)/ W210 (K), W203 (K)/ W463 (K)

3. Mercedes all keys lost – can be programmed on the vchicle withhout removing the EIS

Except for EIS W164/-2008, W251/-2008, W221, W202 (K)/ W208(K)/ W210 (K), and W203 (K)/ W463 (K), all other eis can be programmed on the vehicle directly

4. Mercedes all keys lost, BMW DME/DDE ISN reading and writing in boot mode

23 catagories of Bosch engine, including MEVD/EDC17

6 catagories of Simens/Continental engine, including MSD/MSV engine

source: http://www.chinacardiags.com/wholesale/autel-g-box-tool-for-benz-all-keys-lost.html

Autel G box diagram:

There are two methods to use the G-box, OBDII or on table

Method 1: OBD

W204, W207, W216 and W164 EIS after 2009

all keys lost thru OBD

Connection:

1. Connect the G-Box to vehicle’ s OBDII
2. Remove the fuse of vehicle EIS, Connect the Relay ports to the fuse using the supplied fuse cable
3. When the vehicle has an ELV, connect the K7 port and ELV plug using the supplied K-line cable
4. Connect the G-Box to the Autel Diagnostic Tablet (MaxiIM IM608, IM508)

Method 2: on bench

all Mercedes EISs Autel covered

all keys lost on bench

Connection:

1. Plug the G-Box to the Mercedes-Benz EIS using the packed DB15 Cable
2. Plug to the DC port of G-Box using a power adapter (DV 12V)
3. Plug the G-Box to the Autel Diagnostic Tablet (MaxiIM IM608, IM508)