Here are reviews of m35160wt read/write using CG Pro and VVDI-Prog
i am in contact with cg pro to find a solution as they say it works 100%, the cgpro 9s12 works good on 35080 3, 6, vp, 080dq, 160dq. used on cas3 read very fast. have not tried cas4 yet. as i have yanhua mini too for cas 4, but since getting these tools have no cas4 to play with. will keep you updated
You must follow instruction, for me it work 100%…
You must do it in epron editor and put FF in 4 frist lines…and programme…
I use it and 100% can erase WQ16……….
source: http://www.chinacardiags.com/wholesale/cg-pro-9s12-freescale-programmer.html
tested it on m35160wt that had 95 200km and it made lower to 16km
m35160wt eeprom from 95k km
nice job
source: http://www.chinacardiags.com/wholesale/xhorse-vvdi-prog-programmer-with-m35160wt-adapter-55444.html
