Free Download: ODIS 5.1.6 + POSTSETUP + Launcher + License + Plugins

I share with you ODIS-S 5.1.6 + POSTSETUP + Launcer + license + plugins:

https://mega.nz/#!HMlnXaAB!f1YLo1LD0iiBIfAFD2WN7dXepEVfD5UZuZ7OLfjPev0

Thanks to omarzoro for his contribution

FYI, it’s your own risk!

omarzoro and chinacardiags.com will hold no responsibility for what you try.

If you dont wanna take any risk, spend dollars with a tested version.

ODIS-S 4.4.1 tested version: http://www.chinacardiags.com/wholesale/newest-odis-software-for-vas-5054a-support-multi-languages-stored-in-64g-u-disk-6225.html

1- ODIS Service 5.1.6 PostSetup_89.5.30 

ODIS Service – an offboard Diagnostic Information System Service for concern VAG (Audi, VW, Seat, Skoda, Lamborgini, Bentley) can be installed on the VAS 5051B, VAS 5052A, VAS 6150, VAS 6150A, VAS 6150B, VAS 6160 or a standard stationary or portable computers and used with VAS5054a, VAS 5055, CarDAQ-Plus, iFlash, PassThru SAE J2534. 

On Windows 7 32 Bit:

works with the VAS5054a adapter only on 

On Windows 10:

work with VAS 6154 or PassThru J2534 compatible adapter

This information is only available in the diagnostic software during an active diagnostic session. 

The following VAS diagnostic interfaces are supported:

VAS 6154 (WLAN capable) (Windows 7 + Windows 10)

VAS 5054A (wireless via Bluetooth) (Windows 7)

VAS 5055 (cable via USB connection) (Windows 7)

In addition to the VAS diagnostic interfaces mentioned, other SAE J2534-compliant diagnostic interfaces are supported by the Offboard Diagnostic Information System. To start up, the respective box should be connected to the diagnostic tester via the USB port and the appropriate driver software installed before starting the ODIS Service. Administrator rights are required for the software installation.

The PassThru devices (VCI) with SAE-J2534 conform interface used must be validated for communication with the ODIS Service. Information as to whether the device used is already validated can be requested from the respective manufacturer of the PassThru device. No support can be guaranteed by ODIS Service for PassThru devices that are not validated.

2- ODIS Engineering 9.0.6 PostSetup_Projects_136.0.330 all languages

The Offboard Diagnostic Information System Engineering software is the program that provides you with an interface that complies with SAE J2534 (diagnostic interface). This software enables you to diagnose, code and offline Flash all Volkswagen, Audi, Skoda, Seat, Bentley and Lamborghini brand vehicles.

– Read / Clear error codes

– Adaptations, Basic settings

– Offline flash ecu’s

– Offline Coding

– Field measures

Interface requirements

    VAS5054A WORK ONLY IN WINDOWS 32bit

    Vas 6154 ALL SYSTEMS

    Passthru adapter (possible to set up for 64bit)

3- Odis FLASHDATEN 2019-07-02

VAG flash “ALL-IN-7” (datflash,flashdaten,service42) for audi,vw,seat,skoda,lambo,bentley [07.2019]

Flash VAG “ALL-IN-7” (datflash, flashdaten, service42) for audi, vw, seat, skoda,

lambo, bentley Year / date of publication: 07.2019 System configuration: 

none Interface language: none Tablet: not required Description : VAG flash “ALL-IN-ONE” (datflash, flashdaten, service42) 

for audi, vw, seat, skoda, lamborgin, firmware bentley VAG, merged by brand, you can take the firmware one by one. 

Grouped as they come on the latest records: 

VW cars (Brand-V) 

Commercial VW (Brand-N) (released before 07.2019 for commercial vehicles are also found in cars (Mark-V)) 

Audi (Brand-A) 

Seat (Brand-S) 

Skoda (Brand-C)

4- VAG TPI 18.03-1 (81 107 reports)

Technical Problem Information from auto concern VAG (Audi, Volkswagen, Skoda, SEAT)

“Technical Problem Information (TPL)” contains instructions and information on repairs (since 2001). This includes current information on the service technique (for example, under warranty or service shares). In addition, there are stored instructions for solving current technical problems.

It is in these official summaries that information is provided on the shoals known to the manufacturer and how to eliminate them. Including there is information about the current software versions for specific block models.

The main number of entries in Russian, English (UK), German and Czech, and also in Spanish for SEAT.

The database search is performed through any file manager, for example Total Commander, FAR, Windows Explorer

Hello, I hope with this contribution to help you all, to apologize if English is not very good. This folder is the one that I am using and it works perfect, it would only have to be installed following these steps:

copy with right-click folder VAS5054,

paste and restore everything existing by the folder VAS5054 installed in C / program files (x86) /softing/D-PDUAPI/1.20.42/VeCom/VAS5054

sales