How to use VVDI2 to program smart remote 2010 Audi S5 

auto key programmer

Program smart remote 2010 Audi S5 with Xhorse VVDI2.

Open software VVDI2→ Audi→ Key Learn

Procedure to read BCM, choose “Read by OBDII”

Press “read BCM2 Data(OBDII)”

Insert working key into ignition and switch on(if all keys lost, open headlight and step on brake before continue)

Vag number: 8K0907064DP. Key count: 2

Save BCM2 file

Check key status, make Dealer Key by BCM2 file

Press”ok ” to load BCM2 data

Put new key into programmer, then continue

Dealer key make successful  

Prepare all keys for this car, input the key number that you want to learn: 2, then press key  learning  

Press ok to load BCM2 data

Insert working key into ignition and switch on

Insert every key into ignition and turn on

Once 1 st key learned successful, 1/2 in dashboard

Insert 2 nd key to ignition watch and turn on, once 2nd key learned successful, 2/2 in dashboard

All keys successful learned, test start and remote ok