Kess/Ktag Ksuite 2.47 OBD Tested on EDC15 EDC16 EDC17

ECU Chip Tunning

There are lots of ECU tested with Ksuite 2.47 software, such as EDC15, EDC16, EDC17. ECUs are read and written by Kess V2 or Ktag programming tool.

Here are the test results…

Ksuite 2.47 and EDC15:

New Beetle tdi 105cv 1.9tdi 2004 edc15p
read ok

Vag edc15 read/write ok!

EDC15V, P+ all R/W OK

Ksuite 2.47 and EDC16:

Vag Edc16u34/31: read/write ok!

Golf 5 EDC16U1 OK

Sharan EDC16U31 OK

Ford fiesta 2008 1.6 tdi edc1634 read write by odb

Ford Focus TDCI 1.6 EDC16C36 OK

BMW 320 E46 EDC16C31 OK

EDC16U, U31, U34, C35, CP35, CP34, all R/W OK

Volvo EDC16C31 read-write on K-line…TESTED !

EDC16CP34 3.0 TDI without problem

Mercedes Sprinter 906 2008 edc16c31 Read write obd OK!

Mercedes B180 CDI 2010 EDC16C32 R/W OBD….OK !

MB A180 CDI and B180 CDI, both EDC16c32 R/W OK! Write time very short, but fans running!

Bmw Edc16c31: read/write ok!

BMW Bosch EDC16+C35 via CAN Read/Write OBD ok

Ksuite 2.47 and EDC17:

VW Crafter Bosch EDC17CP20 Tricore External read-write OK!

Edc17C46 writing on obd TESTED !

First I readed with KTAG and after write with Ksuite 2.47.

Audi A6 4G 2012 EDC17cp44 Obd Write ok!

Mercedes-Benz CLS 350 CDI BlueEFFICIENCY 4Matic 7AT with Bosch EDC17CP46 was read with Kess 2.34 Tricore and written with Kess 2.47 Tricore

Audi A5 2008 Coupe
Engine: CAPA 176 kW (240 HP) 3 l
Read over OBD OK, write I don’t want to try my luck
Problem when reading and writing with Kess Tricore, checksum error!

Audi A4 EDC17C46 03L906018HE
Write OK with a frf to bin file made with winols


can’t read on OBD, only in boot mode.

EDC17CP14, CP20, CP44, C64, C46 Read via KTAG-Boot or virtual Read file, Write OK

VW Golf 6 GTD edc17c46 Tprot tricore
Read and write without error CRC OK

VW Tigoun EDC17C64 GPT Tricore
Read and write without error CRC OK
Read and write without error CRC OK

EDC17C64 Skoda Octavia without problem (VR)

BMW E70 X5 Bosch EDC17CP09
Bootloader Tricore Protocol 226
Read OK
Write Not OK, problem with checksum correction
After writing with K-Suite 2.34 no problem with starting engine

Hyundai IX35 EDC17CP14

It doesn’t read on OBD, and this was the safety, but before I read with Kess, I make a full backup (Micro+EEprom) with Ktag. I have important the safety.

Golf 4 2.0 TDI 2017 year. EDC17c74 Kess 5.017 v2.47 with Obd write