New XPROG-M V6.12 Install Guide, Using Tips…

ECU Chip Tunning

New Xprog V6.12 more functions than old version, New Generation Hardware, runs more steady and faster than old version. This article tell you something you should notice when you use it.

1-New-XPROG-M-V6.12-

XPROG-M V6.12 Highlights:

1. Latest Software Version: V6.12, Firmware: V4.4
2. With USB Dongle, No need activation
3. Adds new authorization: AUTH-0028-1 Renesas V850 Authorized and AUTH-0028-2 Renesas SuperH Authorized 2017/10/9
4. Operating System: WinXP/Win7/Win8

  1. Language: English only

XPROG-M 6.12 Newly added authorized:

AUTH-0028-3 Renesas RL78 Authorized
AUTH-0028-4 Renesas M32C Authorized

2-New-XPROG-M-V6.12-

X-PROG V6.12 Newly Added 4 Adapters:

ADP-0019 Rev.B
ADP-0006 M35080 ICP adapter
QFP64 MC908AZ/AS60 3K85K adapter
QO18S714

3-New-XPROG-M-V6.12-

XPROG-M V6.12 spftware add some functions A part display

4-New-XPROG-M-V6.12- 5-New-XPROG-M-V6.12- 6-New-XPROG-M-V6.12-

XPROG-M V6.12 Install Notice

XPROG-M V6.12 windows system required as below:
1. Windows XP 32bit OR windows 7 64 bit required, all the patch software for the windows system should be installed already and the windows properly works well…
2. The windows system should be with at lest 2 partitions (except the CD ROM.)
3. Can not be working with virtual harddisk.

XPROG-M v6.12 Installing Steps

  1. Click the file “installation.reg”, get the file information to the regedit.
    Install the file “AdbeRdr11000_zh_CN.exe”, it is a must, otherwise the Xprog software will not start.
    3. Plug the Xprog main interface to the computer, install the USB driver.
    4. Copy the folder “XPROG-BOX6.12” to the desktop, and open it, and run the “xprogdesktop.exe”, then software open.

XPROG Box 6.12 using tips

  1. You are not allowed to update from the older version Xprog V5.84  to this newest V6.12 XPROG-M Dongle. 
    Make sure anti-virus program closed. Or X-prog software may be killed.
    3. Disconnect the internet. Or V6.12 XPROG-M hardware may be damaged.
    4. Uninstall all of the old version of xprog-m or Xprog box software, before you install V6.12 software we provide, because our xprog-box hardware is not compatible with other lower or higher version software. Otherwise the hardware will be damaged and its warranty will be invalid.
    5. Never try to UPDATE, or XPROG-M hardware will be damaged; if you update it online, its warrantywill be invalid.

Know more about XPROG-M V6.12, you can go to

http://www.chinacardiags.com/wholesale/x-prog-box-ecu-programmer-xprog-m-v560-with-usb-dongle-26631.html