SVCI DoIP Features, Installation, Connection and Car List

Chinacardiags will show you SVCI DoIP highlights, features, PATHFINDER& SDD2 software installation, device connection and the support car list to you here.

SVCI DoIP Highlights:

Supports SDD+ Pathfinder software for JLR from 2005 to 2019
Supports Online Programming (With online account)

SVCI DoIP Features:

1. High speed host communication. (3M bps)
2. Stable host communication. (with RTS/CTS flow control)
3. Automatically register software.
4. Online software update and keep software latest always.
5. Online firmware update.

How to install PATHFINDER software?

Step 1: Before installing the software, you need to make sure the C drive has a capacity of more than 250GB.

Step 2: Access to software download center http://www.flyobd.com/shop/download-center/

Step 3: Select “Pathfinder” item and download pathfinder installer

Step 4: Double-click the file that you download and saved, and then install it.

Step 5: The pathfinder installer will automatically prompt you to download and update the software and files you need to install pathfinder(The automatic download and installation will takes up to 24 hours according to network download speed).

How to install SDD2 and SDD2 “QuickLoader” software?

Step 1: Download software from http://diagnosticdelivery.jlrext.com/idscentral/

Step 2: Select the “SDD_xxx_Full.exe” file, download and save it.

Step 3: Double-click the “SDD_xxx_Full.exe” file and install it.

Step 4: Select SDD2-“QuickLoader” item from http://www.flyobd.com/shop/download-center
download and install it.

Step 5: Double-click the “SDD2 “QuickLoader.exe” file and install it.

Device Connection:

After installed the software, you need to connect the equipment to the computer using a USB cable. Then connect the OBD interface of the vehicle through SVCI DoIP device, or connect the OBD interface of the vehicle and the equipment through the OBD extension cord. The equipment connection diagram is shown as below.

SVCI DoIP supported car list: