Main difference lies in Mercedes, VW, Audi software Software is same but differ hardware. IM508 use XP200. IM608 use XP400. Xp200 doesn’t allow for eeprom and use of breakout leads through the custom pinouts. Autel IM508 and XP200: source: http://www.chinacardiags.com/wholesale/Autel-MaxiIM-IM508-Diagnostic-and-Key-Programming-Tool.html Autel IM608… Continue Reading
Finally, I got the new XP400 adapter. It’s off chinacardiags.com The old one UP400 came with IM600 is burnt since I used it as J2534 adapter to connect to the car for lack of knowledge of the machine. Then it became a… Continue Reading
Is Autel MaxiIM IM608 possible to read password for Dodge? Yes. confirmed to read pass. Here’s the test… Select Dodge Autel IM608 Dodge diagnostic program is loading… Smart mode Turn ignition on If it is old models pre-2006, pls give priority… Continue Reading
Will Autel IM508 + MaxiSys Elite be better than Autel MaxiIM 608? If you specialize on BMW and Benz, then it will be good to invest in the ELITE to have access to the programming software. Remember 98% of programming is… Continue Reading
This is Autel XP400 programmer transponder coverage: Link: http://www.chinacardiags.com/wholesale/autel-xp400-work-with-maxiim-im608.html XP400 adapter can be used to read/write transponders below: Chip Type Name Chip Type Name ATMEL AT24C01 ATMEL AT24C1024 ATMEL AT24C02 ATMEL AT24C128_1.8 ATMEL AT24C04 ATMEL AT24C256_1.8 ATMEL AT24C08 ATMEL… Continue Reading
