I have a problem with ISTA-P – it starts and loads OK with loader, but threre is absolutely no text displayed in its interface except the the status bar on top (see attached screens). Everything was fine but I have… Continue Reading
E series and F/G series Ethernet Difference Good to hear that the Enet port goes directly to the OBD port when originally equipped.: Ethernet in the E Series is only up to transferring maps and data to disk, this is the… Continue Reading
Here is WinKFP setup/installation tutorial, based on the E60 daten from ISTA/P 2.39. This assumes you have installed INPA/Ediabas and WinKFP and they are running correctly. This was done on a WinXP 32 bit system. Unpack the V2.39 ISTA daten folders for… Continue Reading
Error message: When i start Ista-p loader i get this error: Configuration system failed to initialize. Ista-P Loader Unhandled exception has occurred in you application. If you click Continue, the application will ignore this error and attempt to continue. If… Continue Reading
This is for how to update ZB numbers with BMW ICOM and WinKFP. ISSUE: Hello. I’m using ICOM A2 with easyconnect mode OBD_ab625 and type remote”. I’ve been trying to update E53 and E60, DDE and EGS. It goes all well and in… Continue Reading
Share a good thread with you all: CCC Coded and working now using NCS Expert Tool Just wanna share my story on how my ccc just stopped working and how I had to replace and code a new one to… Continue Reading
I bought a 2013 BMW 328i xdrive. It came with Navigation and all the features but it only has Bluetooth phone (only calls, no audio). So i decided to code it and see if i can enable Enhanced Bluetooth audio in… Continue Reading
