I have tried two computers (windows 7 64bit) to install the software of VCX NANO GM, when Tech2Win was fine, but each time it prompted GDS2 and VX Manager were both corrupted.
I received an error prompt of each file while installing WIFI VXDIAG VCX NANO software.
The above problems are both caused by broken source files. There’s something wrong with the installation software downloaded. Please re-download the GDS 2 via:
Note (applied to both Wifi version and USB version):
The software of Vxdiag VCX NANO for GM/OPEL includes two parts: Tech2 Win and GDS2.
Version of Tech2Win: V33.003
Version of GDS2: V2020.4
GDS can only work on Win 7 64-bit and Win 8 64-bit, while Tech2Win can work on both Win 7/Win 8/XP 32- bit and 64-bit.
Run GDS2AutoInstall.exe in Data (D:) disk to install GDS2.
Install VX Manager.
1). Double-click on VX Manager 1.5.0.0428.exe on the desktop.
2). Uncheck the two options framed to complete the installing.
Open VX Manager, select Vehicles Diagnosis → GM GDS2/T2W to install GM GDS2/T2W driver
Open GM GDS2 and select English.
Ready to use! You can star your diagnosis (The following is an example for your reference).
1). Click on Diagnostics and Choose MDI 2, then select continue.
2). Connect the device.
3). Click on Enter to select a Model Year (2010), a Make (Buick) and a Model (Excelle).
4). Select Module Diagnostics → [K9] Body Control Module.
5). Select a Headlamp Type (Halogen (T4A TT4) and a Body Style (Hatchback), then choose Data Display to select Chassis Control Data, where you can see relevant info.
6). Click on Back, you can also select Diagnostic Trouble Codes (DTC) to see DTC data.
For more info about Vxdiag VCX NANO GDS2 and Tech2Win diagnostic programming system for GM/OPEL, please visit: