WiFi/Wired Connection Setup for VXDiag Vcx Nano Mazda

Tutorial: Mazda IDS software install – Kind of different between VXDiag Vcx Nano WiFi unit and non-WiFi unit… look here

Mazda IDS installation guide for non WIFI version:
1. Download and install IDS v100 program ,then must restart
2. install VX Driver VCM II 1.0.6.1224
3. Plug in the VXDiag let the system to detect and install drivers automatically,
4. run the IDS program
5. first time running the program it will pop out a column called ” IDS Configure product”, please choose “non dealer” in dealer type, and country you are, then click tick on the right

Mazda IDS installation guide for WIFI version:
1. Download and install IDS v100 program ,then must restart
2. install VX Driver VCM II 1.0.6.1224
3. install VX manager, and run it ( download from http://www.vxdiag.net/)
4. Run VX manager, click configure, and choose WLAN as the connection type, Click “Save” and “ok”
5. click pc wifi connection, and select “VCX-WIFI”, and waiting the connection succeeded
6. Run the VX manager again, nano WIFI connection will successful.
7. Run the IDS Program.
8. first time running the program it will pop out a column called ” IDS Configure product”, please choose “non dealer” in dealer type, and country you are, then click tick on the right

In details…

Here, take Mazda IDS v95

Open “Computer/ DVD RW Drive (E:) Ford Mazda IDS”, and copy the file “Mazda IDS95” to Desktop.

Open the file “Mazda IDS95” on Desktop to open “Mazda IDS V95”.

Choose the setup language to go on.

Preparing setup.

Select “Yes” to proceed.

install Mazda IDS

Click “Next” to install Mazda IDS on your computer.

Click “I accept the terms of the license agreement”.

Click “Next” in Destination page.

Click “Next” to begin installing Mazda IDS.

Installing…(The software installation will take about 30min-2h. Please wait.)

An icon of “Mazda IDS” shows on Desktop.

Configuring…

Updating…

Click “Reboot” restart your computer after Mazda IDS is installed successfully.

Check if Mazda IDS-V95 opened correctly.

Open “Mazda IDS” on Desktop.

Select Dealer type and Country, and click the tick “√”.

Close the warning interface of Mazda IDS-95.00.

Click “√” to exit.

install Mazda IDS -95.01

Open the file “Mazda IDS95” on Desktop for “Mazda IDS V95.01 update”.

Preparing setup.

Installing…(about 30min)

Configuring…

Updating…

Configuring…

install Mazda IDS -95.02

Open the file “Mazda IDS95” on Desktop for “Mazda IDS V95.02 update”.

Preparing setup.

Installing…(about 30min)

Configuring…

Updating…

Configuring…

 

Restart your computer!!!

install VCMII PLUS

Open “Computer/ DVD RW Drive (E:) Ford Mazda IDS/ VCMII Driver 2.2.0.1505”.

Close the interface.

Click “Next” to install VCMII PLUS.

Installing…

Finish installing VCMII PLUS.

Click the small interface with “Your device is ready to use” at the bottom right corner; read it and close the interface.

Right click “Computer” for “Manage”.

Select “Device Manage” for “Ports (COMP&LPT)/ USB Serial Port (COM4)” and “Universal Serial Bus controllers/ USB Serial Converter”.

Close the interface.

Open “Mazda IDS” on Desktop.

Select “Start New Session/ All other” and click “√”.

Establishing communication to PCM…

Choose “Yes” on “vehicle specification” page.

Choose “No” for “Is the vehicle quipped with DSC?”

Click “√” on “VIN,RO…” page.

Select “Module programming” and click “√”.

Select “Module programming” and click the button , then“Exit”.

Select “DataLogger” and click “√”.

Select “Modules/ PCM” and click “√”.

Then exit after you will get engine coolant temperature.

Back to “vehicle specification” and click

at the bottom to turn to “select option”.

Select “Delete (deletes session)” and click “√”.

Close the interface.

END.

VXDiag Vcx Nano Mazda installation success!

Original:WiFi/Wired Connection Setup for VXDiag Vcx Nano Mazda

sales