Advice for Chevrolet SPS Porgramming with GlobalTIS and MDI

car diagnostic tool

Error message:

Have a problem with SPS function (bloqued with ”server connexion” message).

I have Chevrolet GlobalTIS 09-2011 installed on my laptop and my GM MDI is connected with car and PC (see image attached of MDI Manager).

Chevrolet-GlobalTIS-server-connection-1 Chevrolet-GlobalTIS-server-connection-2 Chevrolet-GlobalTIS-server-connection-3 Chevrolet-GlobalTIS-server-connection-4 Chevrolet-GlobalTIS-server-connection-5

My  test:

I did a test at my desktop and I used an opel PPSG16 ecu
Win Xp Sp3 Tablet PC ( full upgraded it )
Java v6.26 or v7.17
Chevy Gtis 09-2011
GM MDI Manager v8.3.103.117
Genuine GM MDI
Opel PSG16 ( Y20DTH ) – I had no Chevy car or an ecu to test.
But the test it was just to see if I can pass ahead from where you stock
Check the pics

gm-mdi-chevy-sps-programming-1 gm-mdi-chevy-sps-programming-2 gm-mdi-chevy-sps-programming-3 gm-mdi-chevy-sps-programming-4 gm-mdi-chevy-sps-programming-5

My advice:

Install in Native no VMware
Win XP ( Win 7 Ultimate I am very sure will works too )
Net.Frameworks ( v2.0, v3.0, v3.5 at least installed and VCRedist ( v2005, v2008, v2010 at least installed
Install Java v 6.26
Chevy GTis 09-2011
GM MDI Manager ( newer the better )

Check the MDI in the GM MDI Manager first, Connect then Disconect, Cose the MDI Manager
Start GTis and Then SPS Programming
Follow the indication and install also the Tech2 J2534 driver but not the MDI Manager
Then continue and see what happens

I don’t know if you was able to do SPS Programming in Opel cars too ( if I remember well you said that you did it ) but the issue is that the SPS Programming do not communicate with the car

Note: GlobalTis v32 is for Opel.
For Chevy try the Chevrolet Tis 09-2011and maybe you have much more luck

Good luck