Xhorse VVDI Toyota 8A Non-smart Key Adapter User Manual

auto key programmer

Xhorse VVDI Toyota 8A Non-smart Key Adapter is suitable for Toyota 8A All Keys Lost, and works on VVDI2, Key Tool Max & Mini OBD Tool, without disassembling IMMO Box.

Compatible Vehicle Makes:
Levin, Corolla, Rav4, Prado, Land Cruiser, Camry, Highlander, Reiz, Sienna

User Manual (for Toyota’s Hilux):
Important Notes:
Please update your device to the latest version for this function.
During the process, don’t insert a key and please keep ignition off.

Step 1:
Disconnect the positive pole of the car battery to protect the connector and avoid short circuits.

Step 2:
Connect to the fuse box following the instructions as below.


Step 3:
Connect the ELV wires as shown.

Step 4:
Connect to your car’s OBD port, All Key Lost cables and car battery.

Step 5:
Generate start chip referring to software interface.


Step 6:
Disconnect all cables and recover all connection wires to their original status.

If you start the car directly without recovering the connection wires to the original status, the fuse boxes and device will be burnt.

Step 7:
Test the generated transponder.

You can register with a phone number and get online service.

Contact us for other Toyota 8A Non-smart Key Adapter manuals for other models, which are a bit different, but quite similar. You can also click https://youtu.be/aipiJ9piWq8 for video guide.